Low melt flow and higher stiffness, 25% GF

Properties

PropertyNominal Value1UnitTest Method
PhysicalDensity1.59g/cm3ISO 1183
MechanicalTensile Strength150MPaISO 527
Nominal Strain at Break3%ISO 527
Flexural Strength210MPaISO 178
Flexural Modulus8300MPaISO 178
Notched Charpy Impact Strength9kJ/m2ISO 179
ThermalMelt Flow Rate3g/10minISO 1133
HDT(1.8MPa)160ºCISO 75
ElectricalSurface Resistivity1 × 1016ΩIEC 60093
Volume Resistivity1 × 1016Ω . mIEC 60093
FlammabilityFlame RatingHBUL 94

1Typical properties: these are not to be construed as specifications.

Automotive OEM Approvals

ManufacturerSpecificationNotes
FordWSS-M98P14-A3

Disclaimer: The information contained herein is based on our current knowledge and experience for above product, made by Korea Engineering Plastics Co., Ltd. (“KEP”) as delivered in the original package. This information should not be construed as a promise or guarantee of specific properties of this product described or its suitability to their purpose prior to use this product. It is sole responsibility of the users to investigate whether any existing patents are infringed by the use of this product. This product is not intended for use either in medical or a dental implant. Users should meet all safety and health standards. Any intellectual property rights are observed.