Conductive - high strength and creep resistance, MI = 3

Properties

PropertyNominal Value1UnitTest Method
PhysicalDensity1.43g/cm3ISO 1183
Mold Shrinkage (t3mm, Φ100mm)0.9%KEP (Flow Direction)
MechanicalTensile Strength100MPaISO 527
Nominal Strain at Break2%ISO 527
Flexural Strength135MPaISO 178
Flexural Modulus7150MPaISO 178
Notched Charpy Impact Strength4kJ/m2ISO 179
ThermalMelt Flow Rate3g/10minISO 1133
Melting Point165ºCISO 3146
HDT(1.8MPa)160ºCISO 75
ElectricalSurface Resistivity1 × 103ΩIEC 60093
FlammabilityFlame RatingHBUL 94

1Typical properties: these are not to be construed as specifications.

Automotive OEM Approvals

ManufacturerSpecificationNotes
GMGMP.POM.041

Disclaimer: The information contained herein is based on our current knowledge and experience for above product, made by Korea Engineering Plastics Co., Ltd. (“KEP”) as delivered in the original package. This information should not be construed as a promise or guarantee of specific properties of this product described or its suitability to their purpose prior to use this product. It is sole responsibility of the users to investigate whether any existing patents are infringed by the use of this product. This product is not intended for use either in medical or a dental implant. Users should meet all safety and health standards. Any intellectual property rights are observed.